the process of making viscose rayon fiber Parkersburg wv



This Website has no connection with the Viscose Company or FMC Corp.  

This Website is Owned by

Mackey's Antiques & Clock Repair
1249 Gihon Road
Parkersburg WV 26101

   304 422-7274

 e mail


Tygart School Reunion website

Marrtown Reunion website

Parkersburg Viscose website

Wood County History Photography & Scenery

For Early Parkersburg History and Old Pictures

 Over 900 Old Parkersburg & Wood County WV Pictures


Follow us on Facebook go to the link below  Click Like




A river of Spruce logs floating downstream to the mills












where they are debarked, chipped into small pieces and boiled in these digesters with sodium sulphite. the boiled pulp is then washed, shredded and made into sheets of pure wood pulp.

here the sheets of wood pulp have been transported to the Viscose manufacturer where they are being weighed prior to steeping in the required amount of caustic soda solution











after steeping for the required period, the sheets are squeezed to remove excess caustic soda before being kneaded into 'alkali cellulose crumbs' in a pfleiderer such as that shown here. the crumbs are then emptied out and left to mature for a short period

the crumbs are then churned with the correct amount of carbon disulphide, in what is a scaled-up version of the butter churn used by the viscose spinning syndicate. the cellulose is converted into cellulose xanthate (viscose) during this process









The Viscose is aged and stored in tanks from whence it is forced by air pressure to the a large array of spinning machines

a gear pump (lower part of picture) controls the flow of viscose through the candle filter (top of picture) which removes any particles which might block the spinnerette (left of picture) the viscose is forced through the spinnerette into an aqueous solution where it is converted back to cellulose in the form of continuous filaments. the strand of filaments is collected on the rim of a wheel (godet) turning at a constant speed. the filaments are then stretched whilst still wet by passing over a second godet rotating at a faster rate.











each spinning machine has a spinnerette containing many holes, each producing a strand .


the strand passes down a funnel and drops into a rotating spinning box (topham box) shown at the top of this picture. this twists the filaments of the strand which is forced to the outside of the box by centrifugal action, and is wound into a 'cake'. each topham box is connected by a short spindle to a high speed motor shown at the bottom of picture. the topham box was typically moulded from bakelite and courtaulds set up their own moulding department for their manufacture












the 'cakes' are conditioned, marked with identification and wrapped, before being washed, bleached and rewashed by machine

the cakes are dried in hot air. after drying, the strands are then wound from the 'cake' into a form, such as 'cakes' or 'cones' suitable waeving or knitting processes













here yarn is being wound from cones onto a 'warping swift' prior to weaving